谢厦,罗文文,王农,徐应明,孙约兵.蒙脱土-稻壳炭复合材料对Pb(Ⅱ)吸附特性研究[J].农业环境科学学报,2018,37(11):2578-2585. |
蒙脱土-稻壳炭复合材料对Pb(Ⅱ)吸附特性研究 |
Study of adsorption characteristics of Pb2+ on montmorillonite-rice husk bio-charcoal composites |
投稿时间:2018-07-09 修订日期:2018-10-12 |
DOI:10.11654/jaes.2018-0886 |
中文关键词: 稻壳炭 蒙脱土 插层复合 铅吸附 |
英文关键词: rice husk charcoal montmorillonite intercalation composite lead adsorption |
基金项目:国家重点研发计划项目(2017YFD0801402,2018YFD080066);天津市自然科学基金重点项目(17JCZDJC34200,18JCZDJC34000) |
作者 | 单位 | E-mail | 谢厦 | 农业部环境保护科研监测所, 农业部产地环境污染防控重点实验室, 天津 300191 农业部环境保护科研监测所, 天津市农业环境与农产品安全重点实验室, 天津 300191 | | 罗文文 | 农业部环境保护科研监测所, 农业部产地环境污染防控重点实验室, 天津 300191 农业部环境保护科研监测所, 天津市农业环境与农产品安全重点实验室, 天津 300191 | | 王农 | 农业部环境保护科研监测所, 农业部产地环境污染防控重点实验室, 天津 300191 农业部环境保护科研监测所, 天津市农业环境与农产品安全重点实验室, 天津 300191 | | 徐应明 | 农业部环境保护科研监测所, 农业部产地环境污染防控重点实验室, 天津 300191 农业部环境保护科研监测所, 天津市农业环境与农产品安全重点实验室, 天津 300191 | | 孙约兵 | 农业部环境保护科研监测所, 农业部产地环境污染防控重点实验室, 天津 300191 农业部环境保护科研监测所, 天津市农业环境与农产品安全重点实验室, 天津 300191 | sunyuebing@aepi.org.cn |
|
摘要点击次数: 2611 |
全文下载次数: 2810 |
中文摘要: |
采用静态吸附实验,研究蒙脱土-稻壳炭复合材料对Pb2+的吸附动力学和热力学特性,并考察吸附剂用量、共存离子及pH等因素对该复合材料吸附Pb2+的影响。结果表明,复合材料对Pb2+的吸附特性符合准二级动力学模型,等温吸附过程能较好地以Freundlich模型进行拟合,且是以物理吸附为主的自发的吸热反应。复合材料对Pb2+的吸附量随吸附时间的延长先快速增加,后缓慢增加最终达到吸附平衡,且随着复合材料投加量的增加,Pb2+的去除率增大。复合材料对水溶液中Pb2+的吸附性能在pH为5时较好,吸附量达52.79 mg·g-1;不同浓度Ca2+、Mg2+均会对Pb2+的吸附反应产生抑制作用,且Mg2+的抑制作用更强。 |
英文摘要: |
Batch experiments were carried out to study the adsorption properties of Pb2+ on montmorillonite-rice husk carbon composites, and the effect of influencing factors such as the adsorbent dosage, coexisting ions, and pH on Pb2+ sorption was investigated.The results showed that the adsorption of Pb2+ was more consistent with the pseudo-second-order kinetic model.The isothermal adsorption of Pb2+ on composites could be well fitted with the Freundlich isothermal model, and the adsorption process was a spontaneous endothermic reaction based on physical adsorption.With an increase in adsorption time, the adsorption capacity of Pb2+ increased rapidly at first and then decreased gradually before, finally reaching the adsorption equilibrium.With an increase in the adsorbent dosage, the Pb2+ removal rate increased.The highest Pb2+ adsorption performance on the composites was observed at a pH of 5, and the adsorption capacity reached 52.79 mg·g-1.The presence of different concentrations of Ca2+ and Mg2+ in the solution inhibited Pb2+ adsorption, and the inhibitory effect of Mg2+ was stronger. |
HTML
查看全文
查看/发表评论 下载PDF阅读器 |
|
|
|